CGPA to Percentage Calculator

Convert your CGPA using the rule that applies to your course.

The starting rule is an example. Use the formula on your transcript or in your institution’s rules for your programme and examination year.

This converts a final CGPA. It does not calculate CGPA from subject marks or issue an official equivalence certificate.

How to convert CGPA to percentage

There is no single CGPA-to-percentage formula for every institution. CGPA means cumulative grade point average. Its percentage equivalent depends on the grading rules that apply to your course. Select a supported multiplier or enter a custom linear formula.

Percentage = CGPA × multiplier + offset

For a CGPA of 8.2, multiplying by 9.5 gives 77.9%. Multiplying by 10 gives 82%. Both calculations are mathematically correct; only the rule specified by your institution determines which answer belongs on an application.

CGPA conversion examples

Two example rules for a 10-point CGPA scale
CGPACGPA × 9.5CGPA × 10
657%60%
766.5%70%
876%80%
985.5%90%
1095%100%

Using a custom conversion formula

If your published rule is (CGPA − 0.75) × 10, expand the brackets to CGPA × 10 − 7.5. Choose Custom formula, enter your scale, set the multiplier to 10 and the offset to −7.5. For 8.2 CGPA, that produces 74.5%.

Custom mode also supports other grading scales when you know the applicable formula. It does not assume that a 4-point GPA is converted by dividing by four. Piecewise tables, letter-grade mappings and nonlinear formulas cannot be represented by one multiplier and offset.

CGPA, SGPA and percentile are different

CGPA describes a cumulative grade-point average; SGPA describes a semester grade-point average. Use the value and conversion rule required for the result you are reporting. A percentage expresses a score out of 100, while a percentile describes a position relative to other results. This converter cannot derive a percentile or an admission rank from CGPA.

Which conversion rule should I use?

Start with your transcript, examination regulations or the issuing institution’s conversion certificate. Check the programme and examination year, not just the institution’s name. The CBSE 2015–16 annual report documents the historical indicative rule 9.5 × CGPA. That example does not establish the rule for a current university course.

A conversion is different from a change in marks. If you are comparing two percentages, our guide to percentage points and percentage change explains how to describe the difference.

Method checked 14 October 2026. Built by Talha. Your CGPA stays in your browser; see calculator privacy information.

Common questions

Is CGPA × 9.5 always correct?

No. Use it only if it is the stated rule for your qualification. A different multiplier, offset or conversion table may apply.

What is 8 CGPA as a percentage?

It is 76% under a ×9.5 rule and 80% under a ×10 rule. Check your institution’s required method before using either value.

Why does my result show an error?

The CGPA must fit the selected scale, and the formula must produce a value from 0% to 100%. The calculator does not silently cap an invalid result.

Should I average my semester percentages?

Not unless your institution explicitly requires it. Different semesters can have different credit weights. Use the final CGPA and conversion method specified on your academic record.

Questions about a result? See how our calculators are built or report a calculation issue.

Find a calculator

Board Foot CalculatorLinear Feet CalculatorGravel CalculatorMulch CalculatorCubic Yard CalculatorMidpoint CalculatorCubic Feet CalculatorDTI CalculatorSoil CalculatorTile CalculatorCGPA to Percentage Calculator